2Fdeal

Voopoo Drag Max 177W 18650 VW Pod Kit 4.5ml

Fill Type: Bottom Fill
Pod Material: PCTG
Resistance: 0.2ohm (PnP-VM5), 0.15ohm (PnP-VM6)
Protections: Overtime / Short-circuit / Overcharge / Output Over-current / Over-Discharge / Over-temperature / Balance Charge with Different Brand Battery / Battery Reverse Protection
5V / 2A Type-C Fast Charging
Max 177W Output Power
Brand New GENE.FAN 2.0 Chip
SMART mode for beginners
Power-free RBA mode desired by professional players
Dual UI Theme Interfaces
PnP Magnetic Atomizer
Suitable for Multiple PnP Models (PnP Pod / PnP MTL Pod / PnP RTA Pod)
Compatible with All PnP Coils

Millennium Style 22mm 316SS RTA

Features
4ml Capacity
22mm diameter
Interchangeable Chimney: 12, 13 and 14mm
3 different interchangeable bells (one is pre-installed)
6 different adjustable airflow control holes
Adjustable liquid control

Steam Crave Aromamizer Supreme V3 25mm RDTA 7ml
Coupon Code:MAPSUPV3A

Features
510 threading connection
Capacity: 6.0ml with Straight Glass; 7.0ml with Bubble Glass and Chimney extension (included)
Top Filling System
Build Deck: Single Coil deck
Airflow Control: Infinitely adjustable bottom airflow (Honeycomb)
Air supply: 80% side, 20% below
Drip Tip: 810 Drip Tip and comes with 510 drip tip adapter (510 drip tip not included)
Material: Stainless Steel + Pyrex Glass
Maximum 7.0ml e-juice capacity (with Bubble Glass)
Top Fill-System with Bayonet Lock - Dual Fill Port
Infinitely Adjustable Bottom Airflow (Honeycomb)
Air supply, 80% from the side and 20% from below
Well-designed Single Coil Deck
Compatible with Supreme V2 RDTA decks
810 Wide Bore Drip Tip
Designed for DL (direct to lung) vaping

SOB Emperor Style 24mm Mechanical Box Mod + Outlaw Style RDA Kit + Extension Resin

Features
Mod:
Acrylic+ Brass;
Copper 510 contact pin;
Several cut-outs for ventilation;
PEI fire switch;
Copper battery door;
Powered by 2 x 18650 batteries (NOT INCLUDED);

RDA:
Stainless steel construction;
510 threading connection;
Diameter: 24mm;
Velocity style dual post build deck;
Deep juice well;
Adjustable side and bottom airflow;
4 airslots on the cap (2 for each side)

GeekVape Zeus Nano 22mm Sub Ohm Tank Clearomizer

Features
510 threading connection
22mm overall diameter
Leak-proof top to bottom airflow
Flavor -Intensive mesh coils
Makes a good figure even on small battery mods
Starter friendly handling, DL and MTL design for direct and pulling from the mouth to the lung
Easy top refilling system
GeekVape B Series Coil 0.4ohm (25~33W)
GeekVape B Series Coil 0.6ohm (15~25W)
Capacity: 2.0ml (Spare tube glass 3.5ml)

KIZOKU Techmod 80W TC Box Mod 18650


Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy

$14.9 Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD

Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access

ZQ MOOX Pod System Vape Starter Kit 3ml

Features
Material: Zinc alloy
Battery: Built-in 1100mAh
Output Wattage: 8W / 10W / 12W
Voltage: 3.3~4.2V
Output: 3-level switchable for 1.2ohm, full power for 0.6ohm
Charging: Micro USB port
Pod Capacity: 3.0ml
Coil Resistance: 0.6ohm mesh, 1.2ohm Ni-chrome (8~12W)
Pre-built 1100mAh battery, support re-charging via a micro USB port
Numerous protections, responsible for the safety and stability of the operation
3-level of the power-adjustable, easier to customize your vaping experience
3.0ml pod with a top filling design, manageable and leakproof
Top adjustable airflow system and bottom ventilation holes, conducive to cool the device into a tasty state

GeekVape Zeus Nano 22mm Sub Ohm Tank Clearomizer

Features
510 threading connection
22mm overall diameter
Leak-proof top to bottom airflow
Flavor -Intensive mesh coils
Makes a good figure even on small battery mods
Starter friendly handling, DL and MTL design for direct and pulling from the mouth to the lung
Easy top refilling system
GeekVape B Series Coil 0.4ohm (25~33W)
GeekVape B Series Coil 0.6ohm (15~25W)
Capacity: 2.0ml (Spare tube glass 3.5ml)

KIZOKU Techmod 80W TC Box Mod 18650


Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy

$14.9 Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD

Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access

ZQ MOOX Pod System Vape Starter Kit 3ml

Features
Material: Zinc alloy
Battery: Built-in 1100mAh
Output Wattage: 8W / 10W / 12W
Voltage: 3.3~4.2V
Output: 3-level switchable for 1.2ohm, full power for 0.6ohm
Charging: Micro USB port
Pod Capacity: 3.0ml
Coil Resistance: 0.6ohm mesh, 1.2ohm Ni-chrome (8~12W)
Pre-built 1100mAh battery, support re-charging via a micro USB port
Numerous protections, responsible for the safety and stability of the operation
3-level of the power-adjustable, easier to customize your vaping experience
3.0ml pod with a top filling design, manageable and leakproof
Top adjustable airflow system and bottom ventilation holes, conducive to cool the device into a tasty state

GeekVape Zeus Nano 22mm Sub Ohm Tank Clearomizer

Features
510 threading connection
22mm overall diameter
Leak-proof top to bottom airflow
Flavor -Intensive mesh coils
Makes a good figure even on small battery mods
Starter friendly handling, DL and MTL design for direct and pulling from the mouth to the lung
Easy top refilling system
GeekVape B Series Coil 0.4ohm (25~33W)
GeekVape B Series Coil 0.6ohm (15~25W)
Capacity: 2.0ml (Spare tube glass 3.5ml)

KIZOKU Techmod 80W TC Box Mod 18650


Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy

$14.9 Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD

Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access

ZQ MOOX Pod System Vape Starter Kit 3ml

Features
Material: Zinc alloy
Battery: Built-in 1100mAh
Output Wattage: 8W / 10W / 12W
Voltage: 3.3~4.2V
Output: 3-level switchable for 1.2ohm, full power for 0.6ohm
Charging: Micro USB port
Pod Capacity: 3.0ml
Coil Resistance: 0.6ohm mesh, 1.2ohm Ni-chrome (8~12W)
Pre-built 1100mAh battery, support re-charging via a micro USB port
Numerous protections, responsible for the safety and stability of the operation
3-level of the power-adjustable, easier to customize your vaping experience
3.0ml pod with a top filling design, manageable and leakproof
Top adjustable airflow system and bottom ventilation holes, conducive to cool the device into a tasty state

GeekVape Zeus Nano 22mm Sub Ohm Tank Clearomizer

Features
510 threading connection
22mm overall diameter
Leak-proof top to bottom airflow
Flavor -Intensive mesh coils
Makes a good figure even on small battery mods
Starter friendly handling, DL and MTL design for direct and pulling from the mouth to the lung
Easy top refilling system
GeekVape B Series Coil 0.4ohm (25~33W)
GeekVape B Series Coil 0.6ohm (15~25W)
Capacity: 2.0ml (Spare tube glass 3.5ml)

KIZOKU Techmod 80W TC Box Mod 18650


Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy

$14.9 Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD

Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access

ZQ MOOX Pod System Vape Starter Kit 3ml

Features
Material: Zinc alloy
Battery: Built-in 1100mAh
Output Wattage: 8W / 10W / 12W
Voltage: 3.3~4.2V
Output: 3-level switchable for 1.2ohm, full power for 0.6ohm
Charging: Micro USB port
Pod Capacity: 3.0ml
Coil Resistance: 0.6ohm mesh, 1.2ohm Ni-chrome (8~12W)
Pre-built 1100mAh battery, support re-charging via a micro USB port
Numerous protections, responsible for the safety and stability of the operation
3-level of the power-adjustable, easier to customize your vaping experience
3.0ml pod with a top filling design, manageable and leakproof
Top adjustable airflow system and bottom ventilation holes, conducive to cool the device into a tasty state

YFTK Monarchy J3S Style 22mm 316SS DL RTA 2.5ml

Features
510 threading connection
PEEK drip tip
316 stainless steel construction
PCTG Tank Capacity: 2.5ml
Single coil deck
Bottom airflow adjustable
Diameter: 22mm

$28.9 GeekVape Aegis Hero 45W 1200mAh VW Pod System Kit
Coupon Code:MAPAHERO

Features
Battery capacity: 1200mAh
Charging voltage: 5V 1.5A
Mode: Power / Bypass
Output Power: 5-45W
Screen dimension: 0.42'' OLED
Resistance range: 0.1ohm - 3ohm
Working Temperature: -10'C - 45'C
Standby current: ＜10uA
E-juice capacity: 4ml
Filling mode: Top filling
Drip tip type: 510 drip tip
Features
Top airflow zero leakage: A definite zero leakage vaping experience from top airflow system
The more fulfilling vaping experience: Adjustable airflow intake for both MTL or DTL flavor chasing
Optimized output, consistent flavor: The unprecedented Buck-Boost system allows you to get the optimized power and performance all the time, even when the battery is dying.
Intense flavor, higher satisfaction
Perfectly compatible with all upcoming boost coils
Bigger cloud, smoother flavor and, stronger throat hit
Military Grade Mod, IP67 rate, perfect for extreme outdoor activities
Shockproof, no need to worry about breaking by accident
IP67 Water resistant, can be submerged in up to 1 meter for up to 30 minutes
IP67 Dustproof, able to withstand dirty environment and can be easily cleaned
Modern Luxury design for a high-profile performance
Incorporated with a simplistic modern leather design for maximum aesthetics and fashion
Leather is not only soft and comfortable, but also dirt-resistant, wear-resistant, and easy to clean
Strong magnets, make quick & perfect match
Compact mod, but rich clouds
Weighs only 88g, as light as an egg
Thinnest 25.4mm, as thin as your index finger
Easy to carry
Ergonomic Grip - Robust hand feeling
Max. performance consistent user experience
Super fasting firing < 0.020s
Over-heat protection
Highly reliable variable voltage adjustment
Highly reliable variable resistance adjustment

SXK Exocet V2 Style RBA Deck for Billet Box / SXK BB Box Mod kit / SXK Supbox Box Mod Kit

Features
316 stainless steel
510 adapter for test coil wire only, not for vaping
comes with 3 x air tubes, 1 x 1.0mm, 1 x 2.0mm (pre-installed) and 1 x 3.3mm
Suitable for Billet Box / SXK BB Vape Box Mod kit / SXK Supbox Box Mod Kit

Innokin Ares 2 D24 MTL RTA

Features
24mm Diameter
Improved top cap and seals to prevent liquid and air leakage
0.8mm arihole for tighter MTL selection
Easy drop-in coil deck
New cross ari flow control under the coil
Detents to the main ari flow control for accurate selections
Same flavor bell providing smooth and flavorFul MTL vape
Liquid barriers keep the cotton off the airflow under the coil
Top filling
Child-proof design top cap
Full set of accessories

Vandy Vape Requiem 22mm DL / RDL / MTL RDA

Coupon Code:MAPREQUIEM
Features
Three air settings: DL / RDL / MTL
Easy single coil building
22mm in diameter and 24mm beauty ring
Three Drip Tips
0.26ohm fused Clapton coil

Aspire Nautilus GT 75W 18650 VW Box Mod

Features
Dimensions: 129.5 x 45 x 25mm
Battery Type: 1 x 18650 Battery (Not included)
2A Type-C Charging
1~75W Wattage Output Adjust with Three Buttons
Stainless Steel Hollowed Sleeve to Protect Glass
Super Convenient and Reliable Battery Door
Thick Base Hardware for Fast Heat Dissipation and Better Flavor
Precise Airflow Adjustment
Convenient Top Filling
Variable Wattage Mode
Supports MTL and DTL Vaping
Compatible with High VG and High PG E-juices
Vaping Overtime Protection
Low Voltage Protection
Short Circuit Protection
Overcharge Protection
Overdischarge Protection
Overheat Protection

Timesvape Heavy Hitter 20700/21700 Hybrid Mechanical Mod

Features
28mm body tapered to 26mm in diameter
Copper material
Powered by 1 x 21700 / 20700 not included)
Internal Delrin battery protection
Floating battery setting and 510 hybrid connection
28mm and 26mm Threaded Top Hat
Full copper gold plated contacts
Removing the Quick Release Battery
Locking the 1/4 turn button
Cup and Ball contact system

Vazzling Sprint Style BF RDA 22mm

Features
510 threading connection
316 stainless steel construction
1.2mm air hole
Dual-pole for single coil building
Comes with bottom feeder pin for Squonker mod
Diameter: 22mm
 

SXK Supbox 70W TC VW Vape Box Mod Kit SEVO-70 Chipset

Features
SEVO-70 Chipset, the same as SXK BB 70W Mod Kit
Tough Durable ABS Construction
Dimensions: 53 x 31 x 86mm
Output Power: 1~70W
Output Voltage: 0.2V~9.0V
Resistance Range: 0.25~3.0ohm
Input Voltage: 3.0V~4.2V
Display: OLED
Battery: 1 x 18650 / 18350 (not included)
Onboard USB Charging
Escribe Compatible
Compatible with more than 90% of accessories of Billet Box Pod Kit
Supbox pod tank compatible with SMOK RPM Coils
Compatible with more than 95% RTA / RDA / RDTA (less than 24 diameter) on the market
5 different Modes: Pod Mode, Tank / RDA Mode, Universal Mode, 18650 Mode, 18350 Mode
Single 18650 / 18350 battery, output power 1~70W, three output modes: VW / TC / By Pass
Pod Mode: The Supbox Pod System features easy re-filling and is compatible with SMOK RPM Series Coils for great performance.
Tank / RDA Mode: Using the included Cage adapter, the Supbox can be used with any tank or RDA up to 24mm in Diameter.
Universal Mode: The New and original "Uni-Tank" is compatible with most Billet Box Bridges. The Supbox will also accept a Standard Boro Tank
18650 Mode: The Supbox can be used without a cage in standard 18650 mode. Additional Parts and adapters will be sold separately.
18350 Mod: The Supbox can be used without a cage or battery tube to utilize 18350 Batteries for a tiny compact form factor.

$12.9 YFTK Roulette Style MTL / DL 22mm RTA

Features
510 threading connection
Diameter: 22mm
Capacity 3.5ml
510 drip tip
Stainless steel construction
Top refill and juice control by rotation of the drip tip base
Two air Roulette included, one for MTL and the other for DL
Rotate the air Roulette to change the air hole settings
MTL Roulette air hole settings:
A: 0.8mm x 1
B: 0.9mm x 2
C: 0.9mm x 3
DL Roulette air hole settings:
A: 1.8mm x 3.0mm ellipse
B: 1.0mm x 4

ULTON Sputnik Style 22mm RTA 3.8ml w/Extra Airdisks

The bell has been designed to guarantee Sputnik RTA a great performance with flavor, a segment in which we allow ourselves to say that Sputnik has few rivals. The bell allows you to adjust the flow of the liquid.
Inside the Deck is the real heart of Sputnik: the Sputnik AIR DISK. The Sputnik Air Disks are at the same time, the Pin of the positive, the air regulation and a sort of PASS (Pressure Augmentation and Silencing System) which, by forcing the air to divide into smaller flows, which compress and accelerate it, guarantees an incredibly silent and fluid shot and, with the same air flow, much more contrasted.
The Air Disks can be easily replaced at any time without having to touch regeneration and liquid, simply by accessing from the back using the key / stand supplied.

$34.9  SXK Bantam Revision 30W VW Variable Wattage Box Vape Mod Kit w/o 18350 Battery

Features
Output Voltage: 1.0~8.0V
Output Power: 5~30W
Resistance: 0.4~3.0ohm
Chipset: SEVO-30
Full Body CNC Machining
New Updated SEVO-30 Chipset
0.49" OLED Display
Micro-USB Charging
New MTL Refillable Pod Unit Included
AFC Easy Airflow Control
Compatible with Aspire Nautilus Coils
EUC Coil Adapter Included
Quick Release Connector
Battery Type: 1 x 18350 Battery (Not included)

SXK Supbox 70W TC VW Vape Box Mod Kit SEVO-70 Chipset

Features
SEVO-70 Chipset, the same as SXK BB 70W Mod Kit
Tough Durable ABS Construction
Dimensions: 53 x 31 x 86mm
Output Power: 1~70W
Output Voltage: 0.2V~9.0V
Resistance Range: 0.25~3.0ohm
Input Voltage: 3.0V~4.2V
Display: OLED
Battery: 1 x 18650 / 18350 (not included)
Onboard USB Charging
Escribe Compatible
Compatible with more than 90% of accessories of Billet Box Pod Kit
Supbox pod tank compatible with SMOK RPM Coils
Compatible with more than 95% RTA / RDA / RDTA (less than 24 diameter) on the market
5 different Modes: Pod Mode, Tank / RDA Mode, Universal Mode, 18650 Mode, 18350 Mode
Single 18650 / 18350 battery, output power 1~70W, three output modes: VW / TC / By Pass
Pod Mode: The Supbox Pod System features easy re-filling and is compatible with SMOK RPM Series Coils for great performance.
Tank / RDA Mode: Using the included Cage adapter, the Supbox can be used with any tank or RDA up to 24mm in Diameter.
Universal Mode: The New and original "Uni-Tank" is compatible with most Billet Box Bridges. The Supbox will also accept a Standard Boro Tank
18650 Mode: The Supbox can be used without a cage in standard 18650 mode. Additional Parts and adapters will be sold separately.
18350 Mod: The Supbox can be used without a cage or battery tube to utilize 18350 Batteries for a tiny compact form factor.

$12.9 YFTK Roulette Style MTL / DL 22mm RTA

Features
510 threading connection
Diameter: 22mm
Capacity 3.5ml
510 drip tip
Stainless steel construction
Top refill and juice control by rotation of the drip tip base
Two air Roulette included, one for MTL and the other for DL
Rotate the air Roulette to change the air hole settings
MTL Roulette air hole settings:
A: 0.8mm x 1
B: 0.9mm x 2
C: 0.9mm x 3
DL Roulette air hole settings:
A: 1.8mm x 3.0mm ellipse
B: 1.0mm x 4

ULTON Sputnik Style 22mm RTA 3.8ml w/Extra Airdisks

The bell has been designed to guarantee Sputnik RTA a great performance with flavor, a segment in which we allow ourselves to say that Sputnik has few rivals. The bell allows you to adjust the flow of the liquid.
Inside the Deck is the real heart of Sputnik: the Sputnik AIR DISK. The Sputnik Air Disks are at the same time, the Pin of the positive, the air regulation and a sort of PASS (Pressure Augmentation and Silencing System) which, by forcing the air to divide into smaller flows, which compress and accelerate it, guarantees an incredibly silent and fluid shot and, with the same air flow, much more contrasted.
The Air Disks can be easily replaced at any time without having to touch regeneration and liquid, simply by accessing from the back using the key / stand supplied.

$34.9  SXK Bantam Revision 30W VW Variable Wattage Box Vape Mod Kit w/o 18350 Battery

Features
Output Voltage: 1.0~8.0V
Output Power: 5~30W
Resistance: 0.4~3.0ohm
Chipset: SEVO-30
Full Body CNC Machining
New Updated SEVO-30 Chipset
0.49" OLED Display
Micro-USB Charging
New MTL Refillable Pod Unit Included
AFC Easy Airflow Control
Compatible with Aspire Nautilus Coils
EUC Coil Adapter Included
Quick Release Connector
Battery Type: 1 x 18350 Battery (Not included)

$47.9 Stratum Balance Style 60W TC 18350/18650 Mod

Features
POM and ss material
Compatiable with 24mm diameter atomzier
Compatiable with 18350 /18650 battery (battery not included)
510 threading connection
Screen: 0.91"
Input Voltage: 3.2V~4.2V
Input Current: 0.5A~30A
Output Power: 1W~60W
Output Voltage: 0.5V~8V
Atomizer Resistance: 0.1ohm~3.0ohm
Quiescent Current: 0uA~20uA
Coil Material Supported: Ni / SS / Ti
Temperature control range: 100'C~315'C / 200'F~600'F
Efficiency: 91%
C: for 18650 battery over 15C only
Construction from PC and Stainless Steel
Compatible with 24mm diameter atomizer
Powered by 1 x 18350 / 18650 battery (battery not included)

ULTON VG Extreme V2 23mm Style RTA 6.5ml

Features
Dualcoil or Singlecoil
6.5 ml filling volume
Chamber reduction for singlecoil
810 MTL and DL stainless steel DripTip inclusive
Air supply adjustable via Air Pins
Liquid transport via 4 stainless steel ropes
Winding is supplied with air from three sides (frontal, bottom, diagonal top)
high-quality stainless steel construction
DL / RDL / MTL

VapX Geyser 100W VW 18650/20700 Pod Kit
Coupon Code:MAPVAPX

Features
Pod Material: PC
Power Range: 5~100W
Capacity: 6.5ml / 5ml
Resistance Range: 0.1~3.0ohm
Output Voltage: 0.5~8V
Powered by 1 x 21700 / 18650 Battery (Not included, with a sleeve)
Standard Coils: XCoil Model 10 / XCoil Model 15s
Compatible Coils: Coils Of Model 10n/ Model 15d(sold separately)
Adjustable wattage from 5W to 100W
Innovative two AFC pods for precise air control
Tight MTL / Loose MTL / Restricted DL / Loose DL
Single / Dual Mesh XCoils
Easy top refill system
Bust-boost converter for stable and consistent output

$6.59 Ulton Das Ding V3 Style RDA Rebuildable Dripping Atomizer w/ Bottom Feeding Pin and Tool Tube/ Logo

Features
510 threading;
22mm diameter;
Deep juice well, around 30 drops of liquid;
PEEK insulator;
Gold-plated one-piece Ecobrass positive pole ensures;
Low voltage drop;
For single, dual and quadcoil; 
Cotton, fiber and ESS windings are possible;
Bottom feeding pin

ULTON Bilux Style RBA for DOTMOD DOTAIO

https://youtu.be/FLJjdi7rYDQ
Features
Dedicated for DOTAIO Mods
PCTG Tank material
3 different airflow inserts

$49.9 VOOPOO Argus GT 160W TC VW Box Mod + PnP Pod Tank 4.5ml Kit

Resistance: 0.2ohm (PnP-VM5) / 0.15ohm(PnP-VM6)
Features compact, light and durable
Comes with 510 base and transformable PnP Pod Tank
Compatible with all PnP Coils
Monitored by GENE.TT Chip
Provides intelligent functions such as SMART and TC mode
Adopts innovative infinite airflow system
Supports type-C fast charging
Equipped with two dedicated coils: PnP-VM5 0.2ohm and PnP-VM6 0.15ohm
4.5ml large PnP pod tank with bottom filling design
8 safety protections: Overtime Protection, Short-circuit Protection, Overcharge Protection, Output Over-current Protection, Over Discharge Protection, Over-temperature Protection, Battery Reverse Protection, Balance Charge with Different Brand Battery

SXK Monarchy J3S Style 22mm MTL RTA
Coupon Code:MAPJ3S

Features
510 threading connection
316 stainless steel construction
PCTG Tank Capacity: 2.5ml
Single coil deck
Bottom airflow adjustable
Diameter: 22mm

Ambition Mods & R. S. S.Mods Hera Box Mod 60W TC Box Mod 18650

Supports atomizers in 24mm diameter
Output power    1 watts - 60 watts
Available modes    VW, TC (Ni,Ti,SS)
Output voltage    0.5 Volt - 8 Volt
Input voltage    3.2 Volt - 4.2 Volt
Input current    0.5 A - 30.0 A
Compatible resistors    0.1 - 3.0 ohms
Temperature control    yes, 200°F - 600°F (with Celsius mode)
Efficiency    91%
Display    0.91 inch OLED
Compatible batteries    1x 18650 (highdrain) - not included
Cooperation between Ambition Mods and R.S.S. Mods from Italy
max. output power of 60 watts
VW / TC (Ni,Ti,SS)
OLED Display
ergonomic shape
0.91 inch OLED Display
efficiency of 91%
+/- buttons at the botton

ULTON Asgard Mini Style 25mm RDA w/BF Pin

Features
Semi-Postless Build DeckFour (4) 2.5mm x 3mm Terminals
6mm Deep Juice Well
Locking Top Cap & Rail System
Unique, Fully Adjustable Airflow48 Airflow Holes
Ultem Airflow Diffuser
Ultem Chamber Reducer
Quick Release Squonk Pin - Pre-installedInsert Grub Screws (Two in Deck and One in Spare Parts Bag) In Squonk Pin For Standard RDA Setup
Includes Two (2) Delrin 810 Drip TipTallboy 810 Drip Tip
Shorty 810 Drip Tip
Can be used as dripper and squonker.

OBS Cube Pro 80W VW 3000mAh Box Mod -
Coupon Code:MAPOBSPRO

Features
Battery capacity: 3000mAh
Power Range: 5W~80W
Current: <=35uA
Operating voltage: 3.3V~4.2V
Resistance range:0.1ohm~3.0ohm
Fingerprint Cut-off: 90S
Charging voltage: 5V
Charging current: 1.6A
Charging port: Micro USB
Material: Glass + Zinc Alloy
Innovative Fingerprint System
3000mAh Built-in Battery
Max 80W Output
0.96-inch High Definition Colored LED Display
Multiple Security Protections

Uwell Valyrian 25W 1250mAh Pod Kit 3ml

Charging Port: Micro USB
Ergonomic design, exquisite appearance
Integrated 1250mAh Rechargeable Battery
3ml max refillable juice capacity
Top filling design, easy to refill
Magnetic Pod Connection
Micro USB Charging Port
Support nicotine salt and regular e-liquid
Meet the needs of DTL Vaping and MTL Vaping
Sliding top filling method:
Just slide the top cap to fill your e-liquid. The silicone filling port prevents e-liquid from leaking.
Replaceable Coils
The coil can be replaced for more prolonged use and lower cost. The 0.6ohm DTL coil offers a smooth airflow and more cloud. The 1.0ohm coil offers a tight draw to satisfy your need for real MTL vape.
Adjustable Airflow
There is an airflow valve on the side of the pod cartridge. The airflow of the pod can be adjusted as you want to pursue a smoother airflow or tighter draw

ULTON Sputnik Style 22mm RTA 3.8ml w/Extra Airdisks

The bell has been designed to guarantee Sputnik RTA a great performance with flavor, a segment in which we allow ourselves to say that Sputnik has few rivals. The bell allows you to adjust the flow of the liquid.
Inside the Deck is the real heart of Sputnik: the Sputnik AIR DISK. The Sputnik Air Disks are at the same time, the Pin of the positive, the air regulation and a sort of PASS (Pressure Augmentation and Silencing System) which, by forcing the air to divide into smaller flows, which compress and accelerate it, guarantees an incredibly silent and fluid shot and, with the same air flow, much more contrasted.
The Air Disks can be easily replaced at any time without having to touch regeneration and liquid, simply by accessing from the back using the key / stand supplied.

Ambition Mods & R. S. S.Mods Hera Box Mod 60W TC Box Mod 18650

Features
510 threading
SS + PC material
Supports atomizers in 24mm diameter
Output power    1 watts - 60 watts
Available modes    VW, TC (Ni,Ti,SS)
Output voltage    0.5 Volt - 8 Volt
Input voltage    3.2 Volt - 4.2 Volt
Input current    0.5 A - 30.0 A
Compatible resistors    0.1 - 3.0 ohms
Temperature control    yes, 200°F - 600°F (with Celsius mode)
Efficiency    91%
Display    0.91 inch OLED
Compatible batteries    1x 18650 (highdrain) - not included
Cooperation between Ambition Mods and R.S.S. Mods from Italy
max. output power of 60 watts
VW / TC (Ni,Ti,SS)
OLED Display
ergonomic shape
0.91 inch OLED Display
efficiency of 91%
+/- buttons at the bottom

KIZOKU Limit 22mm MTL RTA 3ml Renaissance Edition

Features
Material: Stainless Steel + Glass + PC + Rubber Seal
Renaissance Edition comes with extra tank accessories
Renaissance Edition adds the European classic floral design
High quality SS 304 construction
Compatible with replaceable atomizer coil
Childproof lock and leak-proof valve design
Supports rebuildable DIY coil
Accurate airflow control for MTL / DL vaping
Easy single coil building

VOOPOO Argus GT 160W TC VW Box Mod

Features
Powered by 2 x 18650 Batteries (not included)
Output Power: 5~160W
Output Voltage: 6.4~8.4V
Resistance: 0.1~3.0ohm
Features compact, light and durable
Comes with 510 base and transformable PnP Pod Tank
Compatible with all PnP Coils
Monitored by GENE.TT Chip
Provides intelligent functions such as SMART and TC mode
Supports type-C fast charging
8 safety protections: Overtime Protection, Short-circuit Protection, Overcharge Protection, Output Over-current Protection, Over Discharge Protection, Over-temperature Protection, Battery Reverse Protection, Balance Charge with Different Brand Battery

Stratum Balance Style 60W Temperature Control 18350/18650 Mod

https://youtu.be/uLRCWkuPz8w
Features
PEI and ss material
Compatiable with 24mm diameter atomzier
Compatiable with 18350 /18650 battery (battery not included)

ZQ MOOX Pod System Vape Starter Kit

Features
Material: Zinc alloy
Battery: Built-in 1100mAh
Output Wattage: 8W / 10W / 12W
Voltage: 3.3~4.2V
Output: 3-level switchable for 1.2ohm, full power for 0.6ohm
Charging: Micro USB port
Pod Capacity: 3.0ml
Coil Resistance: 0.6ohm mesh, 1.2ohm Ni-chrome (8~12W)
Pre-built 1100mAh battery, support re-charging via a micro USB port
Numerous protections, responsible for the safety and stability of the operation
3-level of the power-adjustable, easier to customize your vaping experience
3.0ml pod with a top filling design, manageable and leakproof
Top adjustable airflow system and bottom ventilation holes, conducive to cool the device into a tasty state

ULTON Sim Style 25mm 316SS RTA

Features
MTL and DL capable
Deck and positive pole gold plated
lateral, conical filling opening
Liquid transport via 6 stainless steel ropes
MTL Top Cap with stainless steel DripTip included
AFC with cam lock
Improved Version / No Logo

Vazzling Sprint Style BF RDA

Features
510 threading connection
316 stainless steel construction
1.2mm air hole
Dual-pole for single coil building
Comes with bottom feeder pin for Squonker mod
Diameter: 22mm

Ready to Ship in 24 Hours Auguse Draw RTA Pod Cartridge for Voopoo Drag S / X Vape Pod System 4ml

Features
Stainless steel construction
Acrylic tank holds 4ml capacity
Draw RTA Style Rebuildable Tank Pod Cartridge
Suitable for Voopoo Drag S / X Vape Pod System Vape Kit

ULTON Haar Style 22mm RTA

https://youtu.be/fDVb1FXwahg
Features
Liquid Volume: 4.0ml
Fill method: Top fill
Liquid Control
Adjustable air flow DL-MTL
The deck is accessible without having to empty the tank
Dual sides airflow control
Air hole sizes (selectable): 1 x 1.6mm / 1 x 1.4mm / 1 x 1.2mm

Auguse Khaos 22mm RDTA

https://youtu.be/8CBSBYTHLRs
Features
510 threading connection
Top airflow adjustable
Comes with bottom feeder pin for RDA
Comes with bottom feeder pin for RTA

KIZOKU Techmod 80W TC Box Mod 18650

Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy

Smoant Pasito II 2 V2 80W 2500mAh TC VW Pod Kit
Coupon Code:PASITOII

Features
Material: Zinc alloy + PU Leather
Battery: Built-in 2500mAh battery
Output Wattage: 1~80W
Screen: 0.96" Colorful TFT display
Conversion Rate: 95%
Charging: 5V / 2A
Modes: Output Mode VW / DVW / Bypas (best 0.3~3.0ohm)
TC Mode: NI, TI, SS316, TCR (best 0.05~2.0ohm)
Capacity: 6.0ml
Resistance: K-3 Half-DTL 0.60ohm Mesh Coil(20~25W)
K-1 0.3ohm Mesh Coil(50~65W)
6.0ml big e-juice capacity and large visible juice level window
2500mAh internal battery and 80W max output
0.96-inch colorful TFT screen and 5 different color themes
5V / 2A Type-C charging port
Ergonomic 510 drip tip
Compatible with all Pasito and Knight 80 Coils, and new K3 0.6ohm Half-DTL coil
Convenient top adjustable airflow and side filling with silicone plug
510 connector (not included) design to compatible with all kinds of atomizer for high-end vaper require
Provide multiple protections: Low voltage protection, Over-heating protection, Short-circuit protection, 10S Over-time protection
 

$17.59 ULTON Asgard Mini Style 25mm RDA w/BF Pin

Features
Semi-Postless Build DeckFour (4) 2.5mm x 3mm Terminals
6mm Deep Juice Well
Locking Top Cap & Rail System
Unique, Fully Adjustable Airflow48 Airflow Holes
Ultem Airflow Diffuser
Ultem Chamber Reducer
Quick Release Squonk Pin - Pre-installedInsert Grub Screws (Two in Deck and One in Spare Parts Bag) In Squonk Pin For Standard RDA Setup
Includes Two (2) Delrin 810 Drip TipTallboy 810 Drip Tip
Shorty 810 Drip Tip
Can be used as dripper and squonker.

Timesvape Heavy Hitter 20700/21700 Hybrid Mechanical Mod

Features
28mm body tapered to 26mm in diameter
Copper material
Powered by 1 x 21700 / 20700 not included)
Internal Delrin battery protection
Floating battery setting and 510 hybrid connection
28mm and 26mm Threaded Top Hat
Full copper gold plated contacts
Removing the Quick Release Battery
Locking the 1/4 turn button
Cup and Ball contact system

SXK 415 S61 Genesis 22mm RTA

Features
Material: SUS316, PEI
Design for dry flavor, hard throat hit
22mm Diameter, 35.3mm height (without drip tip)
1.2mm/1.0mm air hole

Exvape eXpromizer TCX DL 25mm RDTA

Features
Tank Capacity: 7.0ml
Airflow: Top airflow
Refill: Side filling system
Build Deck: Mesh build deck
Coil Build: Mesh coil building
Specially designed for Direct Lung vape
The first self-winding vaporizer from EXvape
Top filling and top airflow system without leakage
Large 7.0ml e-liquid capacity for long-lasting vape

AIVAPE Scale 22mm MTL RTA 4ml
Coupon Code:MAPSCALE

Video for Details: https://youtu.be/CFN2BiH1BYs
Features
510 threading connection
22mm diameter
2.0mL and 4.0mL capacity
Top refill system
Single coil build
Anti-skid patterns look like fish scale
Separated side and bottom airflow adjustments

Vaporesso LUXE II 220W VW Variable Wattage 18650 Box Mo

Features
Powered by 2 x 18650 Batteries (Not included)
Display: 2.0 inch TFT Color Screen
Output Wattage: 5~220W
Resistance Range: 0.03~5ohm
Charging Current: 5V / 2.5A
Chipset: AXON Chip

Ready to Ship in 24 Hours BP Mods Pioneer MTL / DL 22mm RTA

Video for Details www.youtube.com/embed/1PK2l_aofVo
Features
Material: Stainless Steel + PC
Innovative Airflow Design
Fantastic MTL Vaping Experience
Restricted DL Vaping with Extension Pack (Not included)
Comes in Diamond Like Carbon and Stainless Steel

$52 VapX Geyser 100W VW 18650/20700 Pod Kit
Coupon Code:MAPVAPX

Features
Pod Material: PC
Power Range: 5~100W
Capacity: 6.5ml / 5ml
Resistance Range: 0.1~3.0ohm
Output Voltage: 0.5~8V
Powered by 1 x 21700 / 18650 Battery (Not included, with a sleeve)
Standard Coils: XCoil Model 10 / XCoil Model 15s
Compatible Coils: Coils Of Model 10n/ Model 15d(sold separately)
Adjustable wattage from 5W to 100W
Innovative two AFC pods for precise air control
Tight MTL / Loose MTL / Restricted DL / Loose DL
Single / Dual Mesh XCoils
Easy top refill system
Bust-boost converter for stable and consistent output

$32.9 KIZOKU Limit 22mm MTL RTA 3ml Renaissance Edition

Material: Stainless Steel + Glass + PC + Rubber Seal
Renaissance Edition comes with extra tank accessories
Renaissance Edition adds the European classic floral design
High quality SS 304 construction
Compatible with replaceable atomizer coil
Childproof lock and leak-proof valve design
Supports rebuildable DIY coil
Accurate airflow control for MTL / DL vaping
Easy single coil building

Lost Vape Gemini Hybrid 18650 Pod Kit 4ml
Coupon Code:MAPGEMINI

Compact size and simplicity design:
As a fairly compact pod mod, the handy size and versatile options ensure that this one will be the daily choice for more vapers.
Powered by single 18650 battery with 80W max output:
The Gemini Hybrid utilizes the single 18650 battery to achieve a wattage output range of 5~80W, which is powerful enough to be your ideal vape.
2 IN 1 hybrid device:
You can switch the pod mode and mod mode easily. And enjoying the different vape trip.
0.96 inch color TFT display screen:
Pick your perfect color in 7 available options. Press and hold the Fire and Left (-) button at the same time to change the color theme.
Magnetic Back Cover:
On the back side, the Gemini Hybrid pod mod is secured firmly in place by strong magnets back cover without looseness.
Multiple Protection:
Overheat Protection / 10S Overtime Protection / Short-Circuit Protection / Overcharge Protection
Compatible with Ultra Boost Coils:
Ultra Boost M4 Coil 0.2ohm / Ultra Boost MTL Coil 1.0ohm (included)
Ultra Boost M3 Coil 0.15ohm / Ultra Boost M1 Coil 0.3ohm / Ultra Boost M2 Coil 0.6ohm / Ultra Boost MTL Coil 1.0ohm / Ultra Boost RBA Deck (not included)

Oumier Wasp Nano S Dual-Coil 25mm RDA
Coupon Code:MAPWASPD

Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access

KIZOKU Techmod 80W TC Box Mod 18650

Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy

SXK Monarchy J3S Style 22mm MTL RTA
Coupon Code:MAPJ3S

Features
510 threading connection
316 stainless steel construction
PCTG Tank Capacity: 2.5ml
Single coil deck
Bottom airflow adjustable
Diameter: 22mm

Vandy Vape Kylin M AIO 70W 18650 Kit
Coupon Code:MAYVVKM

Features
Power Range: 5~70W
Battery Type: 1 x 18650 Battery (Not included)
Pod Capacity: 5ml for Rebuildable, 2.5ml for Pre-Built Coils
Coil Type: M Coil 0.3ohm (35~45W) Single Meshed
Operating Voltage: 3.2~4.2V
Output Voltage: 0.5~5.5V
Charging Input Current: 1500mA
Operating Mode: VW / VV / TCSS
Maximum Output Current Protection: < 30A
Charging Port: Type-C Port
True rebuildable AIO pod.
Designed for both DIY (rebuildable) and pre-built coil.
Up to 5ml juice capacity designed for rebuildable atomizer and 2.5ml for the pre-built coil.
PCBA water-proof out of the box.
Up to 70W of output power.
Single Coil Rebuildable Build Deck
Resin Drip Tip and Honeycomb air holes
Multiple Protections:
Open Circuit Protection
Over-current Protection
10 Seconds Cut-off Protection
Over-temperature Protection
Low-Battery Warning Protection
Short Circuit Protection

Vandy Vape Berserker BSKR V2 24mm MTL RTA
Coupon Code:MAPBSKRV2

Features
Material: Stainless Steel + Glass
Tank Capacity: 3ml
Comes with two tubes, three drip tips
Slot Airflow
New Base Design
Any puff style of your choice
New comfortable design of refill cap
Supports Variable setting of the bottom airflow: 0.8mm / 1.0mm / 1.4mm / 1.6mm / 2.0mm / D-1

SXK BB Style 70W All-in-One VW 18650 Box Mod Kit w/ USB Port
Coupon Code:MAPBBTB

Features
This is a high quality device by SXK;
Anodized aluminum construction;
70 watts maximum output;
USB port for charging;
Minimum Kanthal resistance: 0.16 ohms;
Internal OLED display and menu controls;
Powered by 1 x 18650 battery (not included);
Includes a Kanger Subtank Mini style Rebuildable deck with bridge;
Includes a Kanger Subtank coil adapter;
Includes an Nautilus BVC coil adapter;
Black delrin drip tip included;
Exceptional build quality;
Limited stock run

AIVAPE Scale 22mm MTL RTA 4ml
Coupon Code:MAPSCALE

Features
510 threading connection
22mm diameter
2.0mL and 4.0mL capacity
Top refill system
Single coil build
Anti-skid patterns look like fish scale
Separated side and bottom airflow adjustments

$29.99 Cthulhu Artemis 22mm MTL RTA 2.4ml
Coupon Code:MAPARTEMIS

Features
Type: Single Coil RTA
Capacity: 2.4ml
Material: 304 food grade steel
Airflow Ring Holes: 0.8mm / 1.2mm / 1.6mm / 2.0mm / 2.7mm for tight MTL and loose MTL Vapers
Air Pin Holes: 1.0mm / 1.4mm / 1.8mm / 2.0mm (without air pin 2.7mm)
Dome-shape chimney for better flavor and throat hit
High quality 304 stainless steel construction
Best for tight MTL and loose MTL vapers
Asymmetric posts for easy single coil building
Switchable air flow pins without damaging the coil
Changing air pin without damaging the coil
5 x 5 = 25 accurate air flow setting

KIZOKU Kirin Semi-Mech 18350/18650 Mechanical Tube Vape Mod 24mm

Features
Material: Stainless Steel
Battery Type: 1 x 18350 / 18650 Lithium Battery (Not included)
Support Resistance: 0.2~3.0ohm
Output Voltage: 3.5V
Atomizer Interface: 510 interface
High hardness and beautiful all stainless steel shell
Compatible with 18350 / 18650 lithium battery (Not included)
A hand-held compact battery rod
Innovative one-in-one key structure
Advanced Kirin theme graphic design

RTA/RBA for Voopoo Drag S/ XS Pod Kit

Steam Crave Aromamizer Supreme V3 25mm RDTA

Features
510 threading connection
Capacity: 6.0ml with Straight Glass; 7.0ml with Bubble Glass and Chimney extension (included)
Top Filling System
Build Deck: Single Coil deck
Airflow Control: Infinitely adjustable bottom airflow (Honeycomb)
Air supply: 80% side, 20% below
Drip Tip: 810 Drip Tip and comes with 510 drip tip adapter (510 drip tip not included)
Material: Stainless Steel + Pyrex Glass
Maximum 7.0ml e-juice capacity (with Bubble Glass)
Top Fill-System with Bayonet Lock - Dual Fill Port
Infinitely Adjustable Bottom Airflow (Honeycomb)
Air supply, 80% from the side and 20% from below
Well-designed Single Coil Deck
Compatible with Supreme V2 RDTA decks
810 Wide Bore Drip Tip
Designed for DL (direct to lung) vaping

BP Mods Pioneer MTL / DL 22mm RTA

Features
Material: Stainless Steel + PC
Innovative Airflow Design
Fantastic MTL Vaping Experience
Restricted DL Vaping with Extension Pack (Not included)
Comes in Diamond Like Carbon and Stainless Steel

VapX Geyser 100W VW 18650/20700 Pod Kit
Coupon Code:MAPVAPX

Features
Pod Material: PC
Power Range: 5~100W
Capacity: 6.5ml / 5ml
Resistance Range: 0.1~3.0ohm
Output Voltage: 0.5~8V
Powered by 1 x 21700 / 18650 Battery (Not included, with a sleeve)
Standard Coils: XCoil Model 10 / XCoil Model 15s
Compatible Coils: Coils Of Model 10n/ Model 15d(sold separately)
Adjustable wattage from 5W to 100W
Innovative two AFC pods for precise air control
Tight MTL / Loose MTL / Restricted DL / Loose DL
Single / Dual Mesh XCoils
Easy top refill system
Bust-boost converter for stable and consistent output

Vandy Vape Kylin M AIO 70W TC VV VW Box Mod RBA 18650 Pod
Coupon Code:MAYVVKM

Features
Power Range: 5~70W
Battery Type: 1 x 18650 Battery (Not included)
Pod Capacity: 5ml for Rebuildable, 2.5ml for Pre-Built Coils
Coil Type: M Coil 0.3ohm (35~45W) Single Meshed
Operating Voltage: 3.2~4.2V
Output Voltage: 0.5~5.5V
Charging Input Current: 1500mA
Operating Mode: VW / VV / TCSS
Maximum Output Current Protection: < 30A
Charging Port: Type-C Port
True rebuildable AIO pod.
Designed for both DIY (rebuildable) and pre-built coil.
Up to 5ml juice capacity designed for rebuildable atomizer and 2.5ml for the pre-built coil.
PCBA water-proof out of the box.
Up to 70W of output power.
Single Coil Rebuildable Build Deck
Resin Drip Tip and Honeycomb air holes
Multiple Protections:
Open Circuit Protection
Over-current Protection
10 Seconds Cut-off Protection
Over-temperature Protection
Low-Battery Warning Protection

Timesvape Heavy Hitter 20700/21700 Hybrid Mechanical Mod

Features
28mm body tapered to 26mm in diameter
Copper material
Powered by 1 x 21700 / 20700 not included)
Internal Delrin battery protection
Floating battery setting and 510 hybrid connection
28mm and 26mm Threaded Top Hat
Full copper gold plated contacts
Removing the Quick Release Battery
Locking the 1/4 turn button
Cup and Ball contact system

$27.5 ULTON Sputnik Style 22mm RTA 3.8ml w/ 4 AFC

The bell has been designed to guarantee Sputnik RTA a great performance with flavor, a segment in which we allow ourselves to say that Sputnik has few rivals. The bell allows you to adjust the flow of the liquid.
Inside the Deck is the real heart of Sputnik: the Sputnik AIR DISK. The Sputnik Air Disks are at the same time, the Pin of the positive, the air regulation and a sort of PASS (Pressure Augmentation and Silencing System) which, by forcing the air to divide into smaller flows, which compress and accelerate it, guarantees an incredibly silent and fluid shot and, with the same air flow, much more contrasted.
The Air Disks can be easily replaced at any time without having to touch regeneration and liquid, simply by accessing from the back using the key / stand supplied.

Aspire MIXX 60W VV VW 18350/18650 Box Mod

Features
Material: Satin Anodized Aluminum + Surgical Grade Stainless Steel
Battery Type: 1 x 18350 / 18650 (Not included)
Output Wattage: 1~60W
Resistance Range: 0.1~3.5ohm
Screen: 0.91-inch OLED Screen
Supporting Mode: VV Mode / VW Mode / Bypass Mode
Made with the italien modder Sunbox
Conductivity and speed

Whistle V2 Style 510 Drip Tip for DotMod DotAIO Pod / Billet BB Box Mod / RDA / RTA / RDTA

Features
510 Drip Tip
Acrylic material
Suitable for DotMod DotAIO Pod / Billet BB Box Mod Vape Kit / RDA / RTA / RDTA Vape Atomizer

Wotofo Profile 25mm RDTA / RDA w/BF Pin 6.2ml
Coupon Code:MAPPROFILERDTA

Features
Adopting Adjustable Side Honeycomb Air Intake
Honeycomb air intake design is typically useful when there is relatively mass air flow to get in, because it can smooth the flow and stabilize the air

Setting A Striking Tone with Bright Metal On Resin
A stunning decor ring is mounted at the drip tip bottom to liven the look Crafted from metal. this little ring indeed complements some aesthetics on normal 810 resin drip tips in the market

Accommodating Multiple Coil Configurations With Versatile Build Deck
Whether you prefer wire coils or mesh coils, the Pro file RDTA is a great pal The Profile RDTA build deck can work with all Pro - file 1.5 RDA meshes and stabilize the air

Powerful e-liquid-up Method & Automatic e-liquid Transfer
Popular in Germany, this kind of stainless steel wick is in rope shape. It has super strong wicking capability to take e-juice from the bottom of the tank up along its length efficiently and gives automatic juice supply to the cotton This e-liquid transfer method makes large tank capacity viable in reality and cuts the hassle of frequent refills.

NEXMESH Clapton NI80 + A1 0.20 ohms
Let us introduce the NEXMESH Clapton mesh coil now
The Clapton mesh or the mesh-style Clapton you could say. Creative meshing with quality wire, more contact surface for e-liquid, and mixed Clapton heating features, all of these just make the nexMESH Clapton a unique bad boy for huge vapor and amazing flavor .

Specifications:
The collaboration of Wotofo x Mrjustright1
Supports single mesh coil, single / dual wire coils
nexMESH Clapton mesh coil included
Adjustable side honeycomb airflow system for mass and smooth airflow
Middle filling design and BF squonk filling
Supports switching to an RDA
810 resin drip tip with metal ring
RDTA Size: (D25 x 52 7mm (without drip tip & 510 pin)
RDTA Capacity: 6.2ml
Build Deck Diameter: 22.5mm
Supported Coil Type: single mesh coil, single / dual wire coil
Wattage Range: 60~80W
Recommended Wattage: 70~75W
Drip Tip Material & Connection Size: colored resin metal ring, 810 sized
Filling Method: mid filling / BF squonk
Airflow Type: adjustable side airflow
Insulator Material: German PEEK
Threading: 510 thread

SMOKTech SMOK Rigel 230W VW Box Mod 18650

Features
Output Wattage: 1W~230W
Resistance Range: 0.10~2.50ohm
Standby Current: <300uA
Input Voltage: 6.4~8.4V
Output Voltage: 1.0~8.2V
Charging Voltage: 5V+/-0.2V
Charging Current: MAX 2.0A
Rubber coating and carbon fiber surface, perfect hand feel
Powered by two external 18650 batteries (not included)
Powerful chipset, 0.001s ignition speed
Max 230W Power
Type-C Fast Charging
0.96-inch TFT Color Display Screen

Feel The Comfort in Every Detail:
Refreshing the back design with flexible rubber coating and lateral design with classic carbon fiber, RIGEL is polished to be smooth and tough, and there are numerous honeycomb holes scattered in an orderly manner, bringing unique visual sensation and perfect hand feel.
Style Your Mood with six themes:
We personalize the user interface according to your preferences and provide six theme colors. You can switch between different styles by pressing the Fire Key and the UP button at the same time.
Great Clarity for more Convenience:
RIGEL is equipped with a frontal 0.96-inch TFT color display offering basic vape data. The scaled-up layout with highly legible text is of great help for understanding the status of your device.
Ley Power At Its Best:
With two external 18650 batteries, the RIGEL can be powered up to a maximum output of 230 watts, serving you a long-lasting vaping experience.
Multiple protections:
RIGEL provides multiple types of protections to avoid potential risks.
A self-adaptive power output functionality has been added to ensure a constant power output during vaping.

$23.9 Auguse Khaos 22mm RDTA w/BF Pin 2ml
Coupon Code:KHAOS

Features
510 threading connection
Top airflow adjustable
Comes with bottom feeder pin for RDA
Comes with bottom feeder pin for RTA

$11.59 Ohmec Style 30mm RTA

Features
510 threading;
Gold plated contact pin;
Top fill design;
Triple posts build deck;
Dual coil configuration;
Bottom airflow system;
Easy to disassemble
 

$14.9  Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD

Features
25mm diameter
Dual post expansive building deck
5mm deep juice well
810 drip tip
Superior stainless steel construction
Top secured via flathead screws
PEEK insulator
Dual coil configuration
Double O-Ring top cap connection
Dual Slotted airflow system
Side airflow vent to side of coil
Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access

$7.9 C2MNT V2 Style 24mm RDA w/ BF Pin  

Features
510 threading connection
Diameter: 24mm
Material: Stainless Steel (Deck) + Stainless Steel (top cap)
Postless Build Deck
Squonk Ready
Signature Blade AFC
Top Cap Heat Sink Design
Compatible with the Layer Cake Deck

ULTON Bilux Style RBA for DOTMOD

Features
Dedicated for DOTAIO Mods
PCTG Tank material
3 different airflow inserts

Vaporesso GEN X 220W 18650 TC VW Box Mod + NRG-S Tank Vape Kit

Features
510 threading connection
Wattage Output Range: 5~220W
Powered by 2 x 18650 batteries (Not Included)
Resistance Range: 0.03~5.0ohm
Screen: 0.91" OLED Display Screen
Charging current: 5V / 2.5A

Tank capacity: 8.0ml (Standard)
Coil: 0.18ohm GT Meshed Coil (65~80W) / 0.15ohm GT4 Meshed Coil (60~70W)
Aircraft-grade Aluminum:
Its High-end, The first vaping device uses Aircraft-grade Aluminum material going through the cold forging processing, giving the GEN X the ultra-high strength and excellent corrosion resistance to say its quality out loud.
CNC Machining:
Master Craftsmanship, GEN X adopts the three-axis machining craftsmanship to ensure every detail complier with the demanding manufacturing standard for making a luxury.
Stylish Design
Simplicity in Style, Impressing you with the natural aesthetics, the simple yet stylish design is integrated with a 172-degree arc design and the minimalist lines.
AXON Chip with Pulse Mode
Giving Extra Throughout. The AXON chip breaks the using barrier for the entry-level users by offering a friendly operating system, and it's functional. Bringing a responsive vape that can access an innovative PULSE mode, boosting the inhalation every 0.02s to satisfy you with consistent performance.
NRG-S Tank & GT Coils
An Unprecedented Leap in Flavor, Both slide to fill and easy coil replacing make NRG-S tank more convenient to use. It adopts the GT MESHED coil (optional for GT4 MESHED coil), which uses the upgraded mesh technology to maximize interaction between e-juice and cotton, releasing the true flavor from your e-juice consistently.
GT Coils
Theres a coil for everyone. Having all the optional GT coils (GT1, GT2, GT4, GT6, GT8, GT CCELL, GT CCELL2, GT MESHED, GT4 MESHED) that bring up a wide range of styles to fulfill everyones vaping needs. Giving you the dense, rich, and flavorful clouds.

Auguse Khaos 22mm RDTA w/BF Pin 2ml

Features
510 threading connection
Top airflow adjustable
Comes with bottom feeder pin for RDA
Comes with bottom feeder pin for RTA

WAVE MTL 510 Drip Tip for RDA / RTA / RDTA / Sub Ohm Tank

$31.9Lost Vape Gemini Hybrid 18650 Pod Kit 4ml
Coupon Code:MAPGEMINI

Features
Powered by 1 x 18650 Lithium Battery (not included)
Power Range: 5~80W
Current Range: 0.3A~22A;
Coil Resistance Supported Range: 0.12ohm~5.0ohm
Screen: 0.96inch Color TFT Display
Body Material: Zinc Alloy

Compact size and simplicity design:
As a fairly compact pod mod, the handy size and versatile options ensure that this one will be the daily choice for more vapers.
Powered by single 18650 battery with 80W max output:
The Gemini Hybrid utilizes the single 18650 battery to achieve a wattage output range of 5~80W, which is powerful enough to be your ideal vape.
2 IN 1 hybrid device:
You can switch the pod mode and mod mode easily. And enjoying the different vape trip.
0.96 inch color TFT display screen:
Pick your perfect color in 7 available options. Press and hold the Fire and Left (-) button at the same time to change the color theme.
Magnetic Back Cover:
On the back side, the Gemini Hybrid pod mod is secured firmly in place by strong magnets back cover without looseness.
Multiple Protection:
Overheat Protection / 10S Overtime Protection / Short-Circuit Protection / Overcharge Protection
Compatible with Ultra Boost Coils:
Ultra Boost M4 Coil 0.2ohm / Ultra Boost MTL Coil 1.0ohm (included)
Ultra Boost M3 Coil 0.15ohm / Ultra Boost M1 Coil 0.3ohm / Ultra Boost M2 Coil 0.6ohm / Ultra Boost MTL Coil 1.0ohm / Ultra Boost RBA Deck (not included)

WAVE MTL 510 Drip Tip for RDA / RTA / RDTA / Sub Ohm Tank

Features
510 threading connection
316 stainless steel construction
1.2mm air hole
Dual-pole for single coil building
Comes with bottom feeder pin for Squonker mod
Diameter: 22mm